Heating and Ventilating

 

Gas fitter's shoddy work threatened lives

A Brixham gas fitter has been fined after falsely claiming to be registered gas engineer and leaving work he carried out in a dangerous condition.
In a prosecution brought by the Health and Safety Executive (HSE) last week, Torbay Magistrates heard that Sean Collins carried out work on a gas boiler in July and August 2011 at an unoccupied house undergoing renovation in Brixham.

The court was told Collins left the flue of the boiler in a dangerous condition and also removed the gas meter and failed to reinstall it, leaving open-ended gas pipes which could have poured gas into the house.

The matter came to light when the householder could not find the meter and contacted Gas Safe Register.

Further investigations revealed that Collins falsely advertised himself as a member of Gas Safe Register and used the organisation's logo on his on-line publicity material.

Sean Collins, of Penpethy Road, Brixham, pleaded guilty to four offences under the Gas Safety (Installation and Use) Regulations 1988 and one breach of Section 3(2) of the Health and Safety at Work etc Act 1974. He was fined a total of £3,000 and ordered to pay £3,000 in costs.

HSE Inspector Simon Jones, speaking after the hearing, said: 'All gas engineers must be members of Gas Safe Register by law so customers can be sure they are dealing with someone who is properly trained and qualified to do the job.

'Unregistered installers who carry out gas work could expose people to unacceptable risks that can prove fatal.

'Sean Collins pretended to be Gas Safe registered and was happy to take the homeowner's money, disregarding the serious harm and injury he could have caused. Any business or sole trader who carries out work on any gas appliance without being properly trained and registered is breaking the law and HSE will not hesitate to prosecute.'

Paul Johnston, chief executive of Gas Safe Register, said: 'Gas work should only be carried out by a suitably qualified and competent Gas Safe registered engineer. Every registered engineer has an ID card that not only confirms they are who they say they are but also shows the kind of work they are qualified to carry out. We always encourage people to ask to see the ID card and to check the details by calling 0800 408 5500 or visiting www.gassaferegister.co.uk link to external website before allowing anyone to carry out gas work.'


Follow HVROnlineEditor on Twitter
5 November 2012

Comments

By John
05 November 2012 00:01:00
I agree that checks should be made for safety but I find that a gas safety registered person thinks it is a license to print money. I had a boiler replaced and it cost 800.00, no materials needed. Not bad for 8 hours work. Better paid than a doctor and badly fitted as far as I can see
Already Registered?
Login
Not Yet Registered?
Register

FETA welcomes guests to Annual Luncheon

The 2024 FETA Annual Luncheon took place on Thursday 11th April and attracted guests from across the heating, ventilation, building controls, refrigeration and air conditioning industries as well as individuals from related institutions, ...

  25-Apr-2024

Prizes galore to be won on Conex Bänninger’s interactive stand

Conex Bänninger, a global leader in the manufacture of high-quality fittings, valves and accessories, will have an enhanced interactive stand (5D19) at InstallerShow 2024....

  25-Apr-2024

STOKVIS R600

CONDENSING ULTRA LOW NOx PREMIX COMMERCIAL BOILER
  10-Jan-2019
Heating & Ventilating Review is the number one magazine in the HVAR industry. Don’t miss out, subscribe today!
Subcribe to HVR

Diary

HVR Awards 2024
https://www.heatingandventilating.net/gas-fitters-shoddy-work-threatened-lives