Heating and Ventilating

 

HPA welcomes 2018 emission conversion factor figures

The Heat Pump Association (HPA) has welcomed the latest emission conversion factor figures released by the Department for Business, Energy and Industrial Strategy (BEIS).

The latest data set shows another considerable increase in the use of renewable and low carbon sources for grid electricity – resulting in a 19 percent reduction in carbon dioxide equivalent (CO2e) levels since the last set of figures were released.

Emission conversation factors allow CRC Energy Efficiency Scheme participants (large commercial/industrial) to convert the energy they use into tonnes of carbon dioxide. Taxes are then calculated based on yearly emission figures.

The reduction in CO2e levels is part of an overall trend towards reducing dependency on the grid by utilising low emission technologies such as heat pumps, as well as decreasing coal usage.

Heat pumps are leading the way in reducing carbon emissions from space heating and domestic hot water production in buildings and, as the latest set of figures suggests, increased awareness and take-up is now helping to significantly reduce the country’s reliance on gas and oil.

Mike Nankivell, president of the HPA, said: “If the government is to hit its targets and reduce emissions by 80 percent by 2050 then we must continue to push for widespread adoption of renewable technologies and low carbon solutions. As an example to highlight the impact a heat pump can make, a ground source heat pump operating at a seasonal performance factor (SPF) of 3.8 will deliver a 63 percent carbon emissions reduction against a mains gas fired boiler operating at 92 percent efficiency. When up against an oil based system running at 89 percent efficiency, the reduction in carbon emissions jumps to 75 percent.” 

The table below highlights some of the key emissions related statistics for ground source heat pumps, air source hat pumps, gas based systems, oil based systems and liquid petroleum gas (LPG).

 

 

CO2 emissions per kWh supply energy

(gCO2e/kWh)(1)

Typical heat conversion factor

CO2 emissions per kWh delivered energy

(gCO2e/kWh)

% Emissions of GSHP compared to alternative fuel

% Emissions of ASHP compared to alternative fuel

GSHP (Electricity)

289

3.2

90

NA

119%

ASHP (Electricity)

289

2.7

107

84%

NA

Gas

184

0.87

211

43%

51%

Oil

246

0.87

283

32%

38%

LPG

215

0.87

247

36%

43%

28 June 2018

Comments

Already Registered?
Login
Not Yet Registered?
Register

Chancellor visits Kensa and champions Cornwall’s green growth opportunity

The Chancellor of the Exchequer, Rachel Reeves, visited Truro-based ground source heat pump manufacturer Kensa to hear from Cornish businesses driving green growth and investment, and take part in a roundtable to discuss their role in Britain’s ...

  30-Jul-2025

Renowned Welsh Science Park Selects Custom Rinnai R290 Heat Pumps for Heating and Hot Water decarbonisation

Wales’s first dedicated science park has taken a decisive step toward energy resilience and carbon reduction by installing a custom-designed Rinnai heating and hot water system. The solution features multiple R290 high-temperature air source heat pumps, buffer vessels, and Modbus BMS integration – delivered as a complete, optimized package by Rinnai’s in-house design team.

  31-Jul-2025

STOKVIS R600

CONDENSING ULTRA LOW NOx PREMIX COMMERCIAL BOILER
  10-Jan-2019
Heating & Ventilating Review is the number one magazine in the HVAR industry. Don’t miss out, subscribe today!
Subcribe to HVR

Diary

HVR Awards
BESA Industry Awards
https://www.heatingandventilating.net/hpa-welcomes-2018-emission-conversion-factor-figures