SEARCH

Frese introduces Delta T Control system

Is the weather giving you a headache with your heating and cooling system? Hot one minute, cold the next? Is your system at its full capacity? The Delta T Control system could be the answer to your problems.

The Delta T Control system is an innovative solution from Frese, designed as an easy to use control system for measuring, monitoring and controlling temperature difference (?T) between the inlet and outlet of a terminal unit to maximise savings.

Adaptable and versatile, the Delta T Control system can be used as a diagnostic tool as well as a control system to collect and analyse data in both in heating and cooling systems. It can be installed in new build projects, typically with the Frese Optima Compact PICV, or it can be retrofitted to existing valves, without any interruption to the system operation.

How does this work?  Well, poor ?T performance requires additional flow to serve the heating or cooling load which leads to excess equipment being run, loss of capacity, wasted energy and system instability. The Frese Delta T Control System monitors the actual ?T and adjusts the flow through the control valve accordingly, until the ?T of the coil is restored to the minimum set point ?T value.

A decrease in required flow means a decrease in pump energy. By reducing the flow, additional flow capacity is released in the overall system.

For further information, please contact info@frese.co.uk or click here.

26 July 2018

Comments

Already Registered?
Login
Not Yet Registered?
Register

SBS celebrating success

Smith Brothers Stores recently held an event to celebrate its staff and the roll they play in businesses success. The event took place at the East Midlands Conference Centre on the June 29....

  15-Aug-2019

Johnson & Starley add two new members of staff

Johnson & Starley has appointed Darren Keenan as business development manager and Sue Powell as customer service/distribution sales manager...

  15-Aug-2019

Gastite CSST

A wide range of CSST, fittings and accessories are available for projects both large and small. Suitable for all three family gases, the CSST range includes sizes DN15 to DN50 in a choice of lengths. Custom lengths are available for large/multi-family projects. Contractor kits, which include a length of CSST, and two male fittings are also available. Gastite® high-performance XR2™ fittings have a patented Jacket-Lock® fitting which eliminates exposed steel beyond the nut. The range includes male and female fittings, tees, copper compression fittings and couplings. Accessories designed to make installation even easier are also available and include; cutters, utility knives and jacket repair tape.
  12-Aug-2019
Heating & Ventilating Review is the number one magazine in the HVAR industry. Don’t miss out, subscribe today!
Subcribe to HVR

Diary