Know what you want? Try our 'Supplier Directory' 

Cut carbon emissions with Adveco FUSION Commercial Hybrid Hot Water Systems

Commercial hot water specialist Adveco, has introduced the FUSION FPH-S range of low carbon, all-electric, packaged hybrid hot water systems.

FUSION harnesses Adveco’s FPi32 Air Source Heat Pumps (ASHP), a high-pressure ATSH calorifier with electric immersion, controls, and metering to provide a reliable, high-temperature, sustainable and cost-effective system for new commercial build and refurbishment projects.

FUSION is available in 16 pre-specified variants with 6 or 10 kW preheat and 9 or 12 kW electric top-up, with capacities ranging from 200 to 500 litres all rated at 10 BAR for high-pressure applications. Able to meet a range of continuous capacity hot water demands from 257-377 litres/hour makes FUSION highly adaptable for a wide range of commercial buildings.

The FPi32 ASHP is specified to supply a working flow of 50°C for system preheat throughout the year, even when ambient air temperatures drop as low as -25°C. Electric immersion top-up then raises system temperatures in the calorifier to the necessary 60°C to meet commercial requirements for safe hot water demands. The stainless steel construction of the ATSH also makes it an excellent all-rounder, resistant to soft water corrosion and, with FUSION’s unique low electric immersion heat intensity (6W/cm²), is more resistant to scale build-up in hard water areas.

The physical design, dedicated controls and integrated metering ensure the ASHP preheat, and immersion work seamlessly to deliver the highest operational efficiencies. This enables FUSION to make the greatest gains possible from the heat pump, even when ambient temperature and system demands fluctuate. These gains offset much of the direct electrical energy usually required, delivering 53% carbon emissions saving and helping control the operational costs of providing business-critical hot water.

“For organisations with small to medium basin and sink led hot water hot water demands and a desire to embrace a more sustainable business model, the FUSION FPH-S range provides a single, easy to accommodate, highly effective response,” says Bill Sinclair, technical director, Adveco. “By choosing one of these packaged hybrid water systems you gain optimum efficiencies, lower your carbon emissions and can be assured building regulations are being met for your commercial project.”

Features

16 pre-sized variants to meet a wide range of applications

200, 300, 400 and 500-litre capacities

6 or 10kW ASHP preheat

9 or 12kW direct electric immersion heating

257-377 litres/hour continuous capacity

10 BAR high-quality AISI 316Ti and 316L stainless steel vessel (PED (97/23/EC), EN 12897)

Dedicated control system for simple operation and maintenance checks

Lower global warming potential with R32 ASHP

Compact space-saving form factor

www.adveco.co

16 November 2021

Comments

Already Registered?
Login
Not Yet Registered?
Register

Inspire the next generation, urges CIBSE president

Inspiring and supporting the next generation of engineers will help society solve the big technical and scientific challenges of today and tomorrow, Kevin Mitchell, incoming President of the Chartered Institution of Building Services Engineers (CIBSE) said in his Presidential Address.

"Research shows that the most talented young people - those who have a choice of profession - are increasingly drawn to careers where they believe their work will have a positive impact on the world. I would argue that there are few careers that offer more opportunity to deliver real change than that of a Building Services Engineer," he said.

  11-May-2022

Rinnai CPD on hot water applications, the instantaneous approach

Rinnai has issued a CPD – ‘Hot water applications relying on gas – The Instantaneous approach’ with an analysis that shows the following savings: Nearly 20% of the operating cost, over 30% of the capital cost, over 15% reduction in Carbon Footprint, ...

  12-May-2022

If you need to open a Solenoid Valve manually, you need a SVOM!

If you need to open a Solenoid Valve manually, you need a SVOM!
  22-Oct-2021
Heating & Ventilating Review is the number one magazine in the HVAR industry. Don’t miss out, subscribe today!
Subcribe to HVR

Diary

BESA CONFERENCE