Know what you want? Try our 'Supplier Directory' 

Baxi Heating makes masks to help fight coronavirus

Design engineers at Baxi Heating have stepped in to help the NHS during the coronavirus crisis by swapping the use of 3D printers from making prototype boiler components to frames for protective face masks.

Product design team leader at Preston-based Baxi Heating Alan Peel with the protective face mask he has designed and developed with his team

Having seen an article about 3D print hobbyist Sid Lovatt, normally working in the retail trade but currently furloughed, who is 3D printing frames for full-face visors for NHS workers, Alan Peel, product design team leader at Preston-based Baxi Heating, thought his team could get involved too.

Alan is currently self-isolating, and working from home, but he is still managing his team and is able to programme the 3D printers remotely. He explained how his team is running this important project: “After speaking to Sid Lovatt, I set the 3D printer at 11pm, to print overnight. My concern was that printing one frame at a time would take a very long time and there would be nobody around at night to remove the frames from the printer.

“I needed to try and find a method of printing much larger batches of parts, so the changeover was on a daily basis or even twice weekly if possible. I downloaded some software to my home computer and taught myself how to use it. Using this, I was able to stack up a single batch of 25 components in a single build and set them printing at midnight on April 1.

“The following night, I pushed the boundaries further by stacking them more tightly and also interlocking them to maximise how many would fit in the 3D printer footprint. It took many attempts and another late night, but I finally managed to increase the capacity in one build from 25 up to 110 components.

“I was able to share the design files with Sid, so he would be able to increase his build capacity also,” added Alan.

As well as 3D printing mask parts for the NHS in UK, Baxi Heating is also able to help colleagues who work for Baxi in Spain, another country that is being hard hit by coronavirus. The design of the Spanish face mask is different to that used in the UK, as Alan explains. “The Spanish version of the mask support frame was four times higher than the UK version and I couldn’t fit as many in the stack, However, using my new-found programming skills, I managed to maximise the 3D printer footprint build and produce 16 components in a 48-hour period using our second, smaller printer.

“Just a skeleton staff of two or three engineers are working in R&D at any one time now, with the majority of the team working from home, so my colleague in the office, Joseph Folorunsho, product design engineer, is removing the mask parts from the printer and packing them up to be shipped to Sid in Harrogate and our R&D colleagues at Baxi Spain in Barcelona.

“The whole R&D team is pleased that we are able to help provide this much needed, and possibly life-saving, equipment,” added Alan.

David Pinder, CEO of Baxi Heating UK and Ireland, said: “I am really proud of how our colleagues have found ways to pitch in and help with this unprecedented situation. The R&D team has worked on this fantastic project because they were passionate about helping. Colleagues from other parts of the business are using their skills in other ways – for example, our contact centre agents, based in Warwick, have all been set up to work from home, so they can continue to help our customers. And our field service engineers, to whom we have provided appropriate PPE so they can carry out their work safely, are carrying out free of charge boiler repairs for NHS workers.

“This great adversity has brought out the very best in people and I hope that this feeling of national (and international) camaraderie persists long after the current emergency has ended.”

9 April 2020

Comments

Already Registered?
Login
Not Yet Registered?
Register

FETA welcomes guests to Annual Luncheon

The 2024 FETA Annual Luncheon took place on Thursday 11th April and attracted guests from across the heating, ventilation, building controls, refrigeration and air conditioning industries as well as individuals from related institutions, ...

  25-Apr-2024

Prizes galore to be won on Conex Bänninger’s interactive stand

Conex Bänninger, a global leader in the manufacture of high-quality fittings, valves and accessories, will have an enhanced interactive stand (5D19) at InstallerShow 2024....

  25-Apr-2024

STOKVIS R600

CONDENSING ULTRA LOW NOx PREMIX COMMERCIAL BOILER
  10-Jan-2019
Heating & Ventilating Review is the number one magazine in the HVAR industry. Don’t miss out, subscribe today!
Subcribe to HVR

Diary

HVR Awards 2024