Know what you want? Try our 'Supplier Directory' 

Regulations failing to address need for ongoing air quality management

Elta Group technical director Alan Macklin (pictured) believes that regulations governing the energy performance of UK buildings are failing to acknowledge potential changes to Indoor Air Quality over time.

Elta Group technical director Alan Macklin (pictured) believes that regulations governing the energy performance of UK buildings are failing to acknowledge potential changes to Indoor Air Quality over time.

Expert Mr Macklin believes the impact of policies such as the Energy Performance in Buildings Directive (EPBD) and the Renewable Energy Directive (RED) is hampered by a failure to prescribe ongoing monitoring of ventilation performance in buildings.

He said: “As policymakers work towards introducing standards to define specifically what comprises good Indoor Air Quality it is vital that we address the need for an ongoing monitoring requirement too.

“For years, the building services sector has operated with no formal standards for IAQ and whilst that appears to be changed for the better, it is vital that we don’t fall into the trap of promoting a ‘set and forget’ approach.”

He continued: “Ventilation rates in buildings have a tendency to fall short of their original performance specification over time as the characteristics of the building change. The usage of the building itself, the equipment within it, and its level of occupancy throughout the day can all affect air quality, so there is a clear need for levels to be checked regularly over time.

“Ventilation rates are prescribed by the Building Regulations, but it is only through regular monitoring – and adjustment where required – that these prescribed rates can be maintained,” he added.

In the absence of any mandatory monitoring requirement, Alan believes Demand Controlled Ventilation systems should be turned to as a method of self-regulation.

He continues: “The latest Demand Controlled Ventilation technology operates by using VAV diffusers, which effectively control ventilation levels by regulating airflow according to the air quality. By relying on a self-regulating system, building users may only need to check their ventilation levels once every three years or so, safe in the knowledge that their DCV can adjust itself whenever the air quality fluctuates – and in doing so, energy efficiency is maximised at the same time.

“The absence of any firm indoor air quality standards may have been an issue up to now, but with change on the horizon, it is vital that we view ventilation performance and the delivery of energy efficiency as an ongoing process rather than a one-off setup,” he concluded.

22 May 2017

Comments

Already Registered?
Login
Not Yet Registered?
Register

New BESA guidance will ‘revolutionise building air quality’

The Building Engineering Services Association (BESA) has launched a new specification for ventilation hygiene as part of its ongoing efforts to minimise the risk posed by contaminated indoor air to human health and well-being....

  18-Apr-2024
ACR News

Vapac Electrode Boiler launched

As the exclusive Vapac distributor in the UK, Humidity Solutions has announced the launch of the NEW Vapac Electrode Boiler, which incorporates advanced technology to minimise water and energy wastage....

  18-Apr-2024

STOKVIS R600

CONDENSING ULTRA LOW NOx PREMIX COMMERCIAL BOILER
  10-Jan-2019
Heating & Ventilating Review is the number one magazine in the HVAR industry. Don’t miss out, subscribe today!
Subcribe to HVR

Diary

HVR Awards 2024